T8 Nano 2ft Type AB 9W 1170lm
T8 Nano 2ft Type AB 9W 1170lm
T8 Nano 2ft Type AB 9W 1170lm

T8 Nano 2ft Type AB 9W 1170lm

Model NO.:
EDI-T8-9W-2FT-GTB-P
Price:
US $ 2.00-4.00
Delivery:
FOB
Minimum order quantity:
500
Supply Ability:
5000000 / Month
Stock Time:
30 Days
EDI LED TUBE Light NANO T8 2FT 9W TYPE AB 3000K 4000K 5000K 130lm/W 1170lm 5-Years Warranty
Quantity:

Product Features
1. Plug & Play Compatible electronic ballast & ballast bypass direct wire, Single-End or Double-End Input.
2. Very high-power efficiency 130lm/W and high CRI which can reach above 80.
3.Nano meter material with light weight and strong hardness.
4. Optimum light uniformity and high color homogeneity.
5. Overpower, short and open circuit protected.
6. Long lifetime: 50,000 hours with 5 years warranty.
7. NO noise, NO UV and IR, Mercury-free and RoHS compliant.
8. Comply with CE, FCC, Ul and DLC standards.
9. Fire - resisting sleeves: UL94 V0 level, high temperature resistant, thermal-insulation, inflaming retarding.

②Physical Specifications

ModuleEDI-T8-9W-2FT-GTB-P-xxK
Length600mm/2ft
Weight0.2LBs
HousingNANO
LensMilky
Tube Diameter26mm
Base TypeG13
Work EnvironmentIndoor use

Electrical Specifications

ModuleEDI-T8-9W-2FT-GTB-P-xxK
LED Quantity48
Power Consumption9W±1W
Input Voltage100-277ACV
DriverInternal driver
Power Factor>0.95
Light SourceSMD 2835
Operation Temperature-20~40 °C

④Optical Specifications

ModuleEDI-T8-9W-2FT-GTB-P-xxK
Power Consumption9W±1W
Lumens1170lm
Luminous Efficiency130lm/W
CertificateUL DLC
Color Temperature

3000K, 4000K, 5000K, 6000K, 6500K

CRI>80
Beam Angle270 Degree

Installation Guide

“Plug” and “Play” procedure
1. Turn off the power to the light fixture at the breaker panel before installation.
2. Open the diffuser from the light fixture.
3. Remove the fluorescent tubes. Please dispose of these items properly as they contain mercury.


 

4. Put led tube into the lighting fixture.

5. Install the LED tubes, close the diffuser.

6. Turn on the Power.

Retrofit procedure
1. Turn off the power to the light fixture at the breaker panel before installation.
2. Open the diffuser from the light fixture
.

3. Remove the fluorescent tubes. Please dispose of these items properly as they contain mercury.
4.Cut the wires shown as the diagram below.

5. Make the new wire connect to branch circuit shown as the diagram below.
6. Replace the cover over the wiring channel.
7. Install the LED tubes, close the diffuser.


 

8. Turn on the Power.

⑥Packing / weight

Module

Qty/Ctn

(pcs)

Outer box

(in)

G.W/Ctn

(lbs.)

EDI-T8-9W-2FT-GTB-P-xxK2524.60 x 7.30 x6.706

⑦ Packing / weight

    This product has a warranty of period of 5 years from the date of purchase. The warranty is invalid in the case of improper use, installation, tampering or removal of the Q.C. and/or date label, usage in improper working environment or installation not according to the current edition of the National Electric Code. Should this product fail during the warranty period it will be replaced free of charge, subject to correct installation and return of the faulty unit. Manufacturer does not accept responsibility for any installation costs associated with the replacement of this product. This warranty is in addition to the statutory rights in your country of purchase. Manufacturer reserves the right to alter specifications without prior notice. 

Send Message

*
*
*
*
*

Related Products

Model NO.: EDI-APT8-4F15-AB
Model NO.: EDI-APT8-4F16-AB
Model NO.: Power In One AP4FT-AB
Model NO.: EDI-APT8-4F12-AB
Model NO.: EDI-T8-18W-4FT-GTB-P
Model NO.: EDI-T8-15W-4FT-GTB-P
Model NO.: EDI-T8-12W-4FT-GTB-P
Model NO.: Power&CCT In One AP4FT-AB

Send Message

*
*
*
*
*
Choose language