①Product Features 1. 3 Power In One (12W,15W,18W), Switch selection Power. 2. Plug & Play Compatible electronic ballast & ballast bypass direct wire,Single-End or Double-End Input. 3. Very high-power efficiency 130lm/W and high CRI which can reach above 80. 4. Built-in aluminum radiator to ensure the stability of LED lamp beads working temperature! 5. Optimum light uniformity and high color homogeneity. 6. Overpower, short and open circuit protected. 7. Long lifetime: 50,000 hours with 5 years warranty. 8. NO noise, NO UV and IR, Mercury-free and RoHS compliant. 9. Comply with CE, FCC, Ul and DLC standards. 10. Fire - resisting sleeves: UL94 V0 level, high temperature resistant, thermal-insulation, inflaming retarding.
Power In One APT8-AB
12W = EDI-APT8-4F12-AB
15W = EDI-APT8-4F15-AB
18W = EDI-APT8-4F16-AB
Aluminum Base + PC Cover
“Plug” and “Play” procedure 1. Turn off the power to the light fixture at the breaker panel before installation. 2. Open the diffuser from the light fixture. 3. Remove the fluorescent tubes. Please dispose of these items properly as they contain mercury.
4. Put led tube into the lighting fixture.
5. Install the LED tubes, close the diffuser.
6. Turn on the Power.
Retrofit procedure 1. Turn off the power to the light fixture at the breaker panel before installation. 2. Open the diffuser from the light fixture. 3. Remove the fluorescent tubes. Please dispose of these items properly as they contain mercury. 4.Cut the wires shown as the diagram below.
5. Make the new wire connect to branch circuit shown as the diagram below. 6. Replace the cover over the wiring channel. 7. Install the LED tubes, close the diffuser.
8. Turn on the Power.
⑥Packing / weight
4ft AB Power In One
⑦ Packing / weight
This product has a warranty of period of 5 years from the date of purchase. The warranty is invalid in the case of improper use, installation, tampering or removal of the Q.C. and/or date label, usage in improper working environment or installation not according to the current edition of the National Electric Code. Should this product fail during the warranty period it will be replaced free of charge, subject to correct installation and return of the faulty unit. Manufacturer does not accept responsibility for any installation costs associated with the replacement of this product. This warranty is in addition to the statutory rights in your country of purchase. Manufacturer reserves the right to alter specifications without prior notice.